Module 6 Impedance parameters (Z)

 
  • VOLTAGE SOURCE
  • CURRENT SOURCE
  • AMMETER
  • VOLTMETER
comments powered by Disqus

Overview

1. The two port network is as given above. The aim is to determine the z-parameters for the given circuit.
2. To find z11 and z21, open-circuit the output terminals and you will have to measure the voltage across it. And connect a current source to the input terminals as shown
3. To find z12 and z22, open-circuit the input terminals (you will have to measure the voltage across it) and connect a voltage source to the output terminals.

Circuit info

Author

Created on: 18 Sep 2013
<a href="http://www.docircuits.com/public-circuit/1473/module-6-impedance-parameters-z" > Module 6 Impedance parameters (Z) <a/>